> For the complete documentation index, see [llms.txt](https://docs.kegland.com.au/products/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.kegland.com.au/products/canning-equipment/cannular-auto-lifter-600-pet-and-aluminium-canning-or-user-guide/seaming-operation.md).

# Seaming Operation

KL52979 Cannular Auto-Lifter 600 | Seaming Operation

### Seaming Modes

The Cannular Auto-Lifter has two Seaming Modes - **Single** and **Continuous**

To select the desired seaming mode, use the <img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2Fr0v1OjT6biG9OSlV1JHD%2FCycle.webp?alt=media&amp;token=c3f0f2b1-04ba-4961-9794-e1bbbd60780c" alt="" data-size="line"> **Cycle** to highlight the current option - navigate to **Single** and **Continuous**. Use the <img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2Fr0v1OjT6biG9OSlV1JHD%2FCycle.webp?alt=media&amp;token=c3f0f2b1-04ba-4961-9794-e1bbbd60780c" alt="" data-size="line"> **Cycle** to cycle between the current highlighted option. To change the displayed, highlighted parameter, use the <img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2F2D4ZYYC0L1F9Teqqhl4c%2FEnter.webp?alt=media&amp;token=9f8b6392-8a8b-4d19-8242-918657773ad5" alt="" data-size="line"> **Enter** (Up) button.

**Single/Continuous** - Toggles between Single or Continuous Operation.

In **Single** operation, the <img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2F7Q4GTLa32PnOE70sewjz%2FStart.webp?alt=media&amp;token=f26d60d7-e5d5-4599-ad87-b27b7add5225" alt="" data-size="line"> **Start** button will perform one operation.

In **Continuous** operation, the unit will continue to operate continuously with a user set delay between cycles.

**Delay** - the Delay function affects **Continuous Operation only**. Use the <img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2Fr0v1OjT6biG9OSlV1JHD%2FCycle.webp?alt=media&amp;token=c3f0f2b1-04ba-4961-9794-e1bbbd60780c" alt="" data-size="line"> **Cycle** button to highlight the Delay (it will flash when selected). Use the <img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2F2D4ZYYC0L1F9Teqqhl4c%2FEnter.webp?alt=media&amp;token=9f8b6392-8a8b-4d19-8242-918657773ad5" alt="" data-size="line"> **Enter** (Up) button to increase the delay. Use the STOP (Down) button to decrease the delay.

### Seaming Operation

All Cannular Auto-Lifter 600 units are factory calibrated prior to shipping. In most cases, the only user adjustment required to achieve a hermetic seal will be the [**Top Force setting**](https://docs.kegland.com.au/products/canning-equipment/cannular-auto-lifter-600-pet-and-aluminium-canning-or-user-guide/components-and-operation.md#suggested-top-force-range) (which is dependant on a number of factors including can size and material). If the chuck is changed by the operator (to accomodate VISY ends, for example) then the unit will require calibration to the new chuck before use. Sometimes calibration settings can drift during operation or transit.

{% hint style="warning" %}
**Warning**: Only use **filled** cans when seaming, testing or calibrating. Cans for testing and calibration should ideally be filled with soda (carbonated) water. If this is not available use water instead. Seaming empty cans  is not advised.
{% endhint %}

Before first use, perform a test run with the selected can to ensure that the Cannular Auto-Lifter 600 is calibrated and the Top Force is correct. If a seal is not achieved, [**adjust the Top Force**](https://docs.kegland.com.au/products/canning-equipment/cannular-auto-lifter-600-pet-and-aluminium-canning-or-user-guide/calibration.md#top-force-adjustment) and check again. If this is not successful then [**Calibration** ](https://docs.kegland.com.au/products/canning-equipment/cannular-auto-lifter-600-pet-and-aluminium-canning-or-user-guide/calibration.md#roller-calibration)may be required.

### Single Can Seaming

Place the can to be seamed on the table and adjust if needed using the lever arm to move the table claws. Move the lever clockwise to tighten, anti clockwise to loosen. The can should be held securely in place.

<figure><img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2FKe9rYQfDvRaBgzJBSilO%2FTighten%20Table%20claws.jpg?alt=media&amp;token=dc9a3033-cfcc-4ce6-8a50-09e68d6080bc" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}
**NOTE**: If cans of the same diameter will be filled, the table claws can be locked in place. This is recommended if A: many cans of the same diameter will be seamed or B: if the Cannular will be operated in **Continuous Mode** with cans of the same diameter.
{% endhint %}

To lock the table claws, use a 4mm Allen Key to tighten the central nut as shown. Do not over tighten.

<figure><img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2FmLimiUPqOqujRh1UHXvH%2FTighten%20Table%20claws.jpg?alt=media&amp;token=d6a1ef32-c07d-4728-8653-f3f899f90120" alt=""><figcaption></figcaption></figure>

Fill the can with the beverage to be canned. Best practice for carbonated beverages is to fill and 'cap on foam'. That is, fill the can to close to the top with some foam or head above the top rim of the can.

Place the can end on the foam. Place the can on the table.&#x20;

Press <img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2F7Q4GTLa32PnOE70sewjz%2FStart.webp?alt=media&amp;token=f26d60d7-e5d5-4599-ad87-b27b7add5225" alt="" data-size="line"> **Start** - this begins the seaming process. The table will raise the can to the chuck, the rollers will engage the can and chuck to seam the can. When complete, thew table will lower automatically.

### Continuous Can Seaming

The process for Continuous Can Seaming is exactly the same as Single Can Seaming. However, once the <img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2F7Q4GTLa32PnOE70sewjz%2FStart.webp?alt=media&amp;token=f26d60d7-e5d5-4599-ad87-b27b7add5225" alt="" data-size="line"> **Start button** is pressed, the seaming operation will continue until the <img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2FtOZhlf2cW1IN1jnvTw7l%2FStop.webp?alt=media&amp;token=40a7e7d2-526a-4733-a840-a8a9ee0d0183" alt="" data-size="line"> **STOP** button is pushed.

The table will raise and lower automatically. The time between can seaming operations is adjustable and can be set by the user using the **Delay** function.

**Delay** - the Delay function affects Continuous Operation only. Use the <img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2Fr0v1OjT6biG9OSlV1JHD%2FCycle.webp?alt=media&amp;token=c3f0f2b1-04ba-4961-9794-e1bbbd60780c" alt="" data-size="line"> **Cycle** button to highlight the Delay (it will flash when selected). Use the <img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2F2D4ZYYC0L1F9Teqqhl4c%2FEnter.webp?alt=media&amp;token=9f8b6392-8a8b-4d19-8242-918657773ad5" alt="" data-size="line"> **Enter** (Up) button to increase the delay. Use the  <img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2FtOZhlf2cW1IN1jnvTw7l%2FStop.webp?alt=media&amp;token=40a7e7d2-526a-4733-a840-a8a9ee0d0183" alt="" data-size="line"> **STOP** (down) button to decrease the delay.

The **Delay** can be set between 0:00 and 1.59 (M:SS)

**Continuous Can Seaming** operation is ideal for canning runs when multiple cans of the same size need to be filled and seamed. it is not recommended if cans of different sizes or materials are used in one run as different cans often reqyuire a Top Force adjustment to achieve a good seam.

### Seaming in Operation

<figure><img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2FiTPLx8chi77heCLFn7vm%2FSeaming%20in%20action.jpg?alt=media&amp;token=0dfdcfbd-2ebd-46a0-b3ee-59b25d0fa101" alt=""><figcaption><p>1: Can placed on table    2: Press Start button   3: Seaming in operation</p></figcaption></figure>

The operation is completely automatic once the filled can and end are placed on the table, and the ntable claws adjusted to hold the can in position. Simply press the <img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2F7Q4GTLa32PnOE70sewjz%2FStart.webp?alt=media&amp;token=f26d60d7-e5d5-4599-ad87-b27b7add5225" alt="" data-size="line"> **Start** button to raise the can, seam the can and lower the can, ready for the next can.
