General Troubleshooting

KL15769 Cannular Compact Semi-Auto Canning Machine | Troubleshooting

Problem	Possible Cause	Solution
Cannular cuts out in use	Power Supply tripping - bearings	Check that the rollers and table bearings spin freely. Too much restriction can cause the power supply to trip
	Power Supply tripping - table hieght	Check the table hieght. If the can is pushed against the chuck too hard this can overload the power supply in use.
	Faulty Power Supply	Test DC output with multimeter. Replace Power Supply if faulty
Cannular does not stop after complete operation	Faulty Relay or Microswitch	If the Cannular continues running after the both operations are complete it could either be a faulty relay or a faulty micro switch. There is no real way of checking which it might be other than replacing parts. The relay is located at the back of the unit under the cover near the anderson plug and to access the micro switch you will need to take the blue cog wheel out. The black lobe activates the micro switch after each rotation.
Cannular does not return to correct start position	Microswitch requires adjustment	Refer to Adjust Cannular Start Position
Can buckles when operation begins	Table height to high	Adjust the table height
	Cannular Table not concentric	Adjust the table to be concentric