> For the complete documentation index, see [llms.txt](https://docs.kegland.com.au/products/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.kegland.com.au/products/hizo/kl50913-hizo-spiro-outdoor-pizza-oven-or-user-guide/assembly-and-testing.md).

# Assembly & Testing

## Device Overview and Individual Parts

{% columns %}
{% column %}
Pizza Stone
{% endcolumn %}

{% column %}

<figure><img src="/files/3SwM3yRWQjoFK9rMj31Z" alt=""><figcaption></figcaption></figure>
{% endcolumn %}
{% endcolumns %}

{% columns %}
{% column %}
Pizza Oven Body
{% endcolumn %}

{% column %}

<figure><img src="/files/35XZ1IG375CENJR8h08U" alt=""><figcaption></figcaption></figure>
{% endcolumn %}
{% endcolumns %}

## Assembly

Before assembly, make sure all parts are present. If any part is missing or damaged, do not attempt to assemble the appliance.

1. Place four AA batteries in the display screen as shown below.<br>

   <figure><img src="/files/0kxG8BMZq6UpJdyshTEZ" alt=""><figcaption></figcaption></figure>
2. Insert the plug of the pizza oven into the socket corresponding to the arrow color on the display screen as shown below.<br>

   <figure><img src="/files/uN0siq87VZtS1S0UDXzz" alt=""><figcaption></figcaption></figure>
3. Unscrew (anticlockwise) the knob on the back of the pizza oven and insert a AA battery as shown below<br>

   <figure><img src="/files/1sL6k0JQRtrbV437GZgz" alt=""><figcaption></figcaption></figure>
4. Insert the pizza stone on the rotating plate in the oven.<br>

   <figure><img src="/files/aRSOvDQEyKBfsrKv3uzK" alt=""><figcaption></figcaption></figure>

   <figure><img src="/files/nO02xJbftMOZd7wuX50D" alt=""><figcaption></figcaption></figure>
5. Connect the gas hose to the pizza oven.<br>

   <figure><img src="/files/CwEsmheYYUreUqhnfPWy" alt=""><figcaption></figcaption></figure>

   6\. Minimum required distance between the HIZO Pizza Oven and the LPG cylinder is 600mm<br>

   <figure><img src="/files/atsXbHhxkd3EZkW19Bgn" alt=""><figcaption></figcaption></figure>

## Before Testing

Make sure all packing material has been removed from the appliance.

Make a solution of one part liquid detergent and one part water. You will need a spray bottle, brush or rag to apply the solution to the fittings.

## Testing

1. Turn the burner valve **OFF**
2. Turn the liquid propane cylinder valve on anticlockwise to open the valve.
3. Apply a soapy solution to all gas fittings. Soap bubbles will appear where a leak is present.
4. If a leak is present, immediately turn the gas supply **OFF** and tighten leaky fittings.
5. Should the gas continue to leak from any of the fittings, turn the gas supply OFF and contact customer service.
6. Turn the gas back **ON** and recheck.