LogoLogo
  • Product Documentation
  • Kegging Equipment
    • Series X User Guide
      • Quick Start Guide
      • Preparation & Setup
        • Keg Types
          • Guide to Commercial Kegs & Couplers
          • Guide to Homebrew/Cornelius Kegs & Disconnects
      • Font Kit Assembly
        • Single, Double and Triple Font Kits
        • Quad Font Kits
        • Tee Bar Font Kits
      • Leak & Pressure Testing
      • Balancing Lines & CO2 Pressure
      • Installation Diagrams
      • Operation
      • Troubleshooting
    • Series X Plus User Guide
      • Quick Start Guide
      • Preparation & Setup
        • Keg Types
          • Guide to Commercial Kegs & Couplers
          • Guide to Homebrew/Cornelius Kegs & Disconnects
      • Font Kit Assembly
        • Single, Double and Triple Font Kits
        • Quad Font Kits
        • Tee Bar Font Kits
        • Super Slim Font Kits
        • Modular Fonts
      • Leak & Pressure Testing
      • Balancing Lines & CO2 Pressure
      • Installation Diagrams
      • Operation
      • Troubleshooting
    • Series 4 User Guide
      • Quick Start Guide
      • Preparation & Setup
        • Keg Types
          • Guide to Commercial Kegs & Couplers
          • Guide to Homebrew/Cornelius Kegs & Disconnects
      • Font Kit Assembly
        • Single, Double and Triple Font Kits
      • Leak & Pressure Testing
      • Balancing Lines & CO2 Pressure
      • Installation Diagrams
      • Operation
      • Troubleshooting
    • KegLand Undercover / Build In / Semi-Integrated Kegerator | Quick Start Guide
      • Preparation & Installation
      • Setup
        • Keg Types
          • Guide to Commercial Kegs & Couplers
          • Guide to Homebrew/Cornelius Kegs & Disconnects
      • Font Kit Assembly
        • Single, Double and Triple Font Kits
        • Quad Font Kits
        • Tee Bar Font Kits
      • Leak & Pressure Testing
      • Balancing Lines & CO2 Pressure
      • Installation Diagrams
      • Operation
      • Troubleshooting
    • Grand Deluxe 3 | Quick Start Guide
      • Specifications
      • Setup & Assembly
      • Installation Diagrams
      • Operation
      • Troubleshooting
  • Brewing Equipment
  • Fermentation Equipment
  • Distilling Equipment
  • benchy range
    • Benchy Sparkling Zero User Manual
      • Technical Specifications
      • Warnings and Installation Checklist
      • Connections & Plumbing
      • Benchy Sparkling Initial Startup Procedure
      • Troubleshooting
      • Warranty (Australia)
  • Pizza | BBQ | Smokers
    • HIZO NEO E13 Pizza Oven User Manual
      • Safety Instructions
      • Parts & Accessories
      • Quick Start Guide
      • Cooking Functions
      • Settings Guide
      • Troubleshooting
      • Error Codes
      • Cleaning & Maintenance
  • Cleaning & Packaging
Powered by GitBook
On this page
  • Included
  • Dimensions (Grand Deluxe 3 Two Door Model)
  • Dimensions (Grand Deluxe 3 Three Door Model)
  • Specifications
Export as PDF
  1. Kegging Equipment
  2. Grand Deluxe 3 | Quick Start Guide

Specifications

Grand Deluxe 3 | Specifications

PreviousGrand Deluxe 3 | Quick Start GuideNextSetup & Assembly

Last updated 1 month ago

WARNING - IMPORTANT INFORMATION

IF FRIDGE HAS JUST BEEN MOVED DO NOT TURN ON UNLESS IT HAS BEEN STANDING UPRIGHT FOR ATLEAST 24 HOURS. FAILURE TO DO SO WILL VOID WARRANTY. STAND FRIDGE IN THE UPRIGHT POSITION FOR 24 HOURS BEFORE PLUGGING INTO MAINS POWER SOCKET

CO2 GAS CAN BE DANGEROUS. MAKE SURE TO ALWAYS USE CO2 IN A WELL VENTILATED SPACE.

ENSURE THERE IS A MINIMUM OF 100MM CLEARANCE ON THE LEFT HAND SIDE OF THE UNIT (ON THE COMPRESSOR SIDE). FAILURE TO PROVIDE ADEQUATE VENTILATION SPACE WILL REDUCE PERFORMANCE AND VOID WARRANTY

CLIMATE CLASS 4 - RECOMMENDED TO BE USED INSIDE AN AREA THAT DOES NOT EXCEED 30°c AND 55% RELATIVE HUMIDITY. IF USED OUTSIDE, NOTE THAT THE COMPRESSOR WILL OPERATE FOR LONGER INTERVALS AND DEFROST CYCLES WILL NEED TO BE ADJUSTED BASED ON TEMPERATURE/HUMIDITY LEVELS

THESE UNITS DO NOT HAVE HEATED DOORS. IN AREAS OF HIGH HUMIDITY THE DOORS CAN FROST OR PRODUCE CONDENSATION

NEVER EXCEED 40PSI ON YOUR KEG SYSTEM.

FLUSH OUT CHEMICALS FROM YOUR BEER LINE COMPLETELY BEFORE TAPPING KEG.

ALWAYS THOROUGHLY CHECK FOR GAS LEAKS ONCE YOU HAVE SET UP YOUR SYSTEM.

Included

  • 6 x Heavy Duty Castor Wheels and bolts

  • Rubberised wire racks (2 shelves two door models, 4 shelves in three door models)

  • Font fan conduit (single run for two door models, double run for three door models)

  • Inbuilt countersunk stainless drip tray system with drainage tubes fitted

  • Door keys

Dimensions (Grand Deluxe 3 Two Door Model)

External: 1495mm (L) x 705mm (W) x 910 (H) [without 100mm castor wheels] Internal: 1160mm (L) x 550mm (D) x 780mm (H)

Dimensions (Grand Deluxe 3 Three Door Model)

External: 2300mm (L) x 710mm (W) x 910 (H) [without 100mm castor wheels] Internal: 1970mm (L) x 550mm (D) x 780mm (H) Distance from the centre of the font holes: 714mm

Specifications

  • Durable Dixell temperature controller.

  • r290 refrigerant gas. This is more electrically efficient, environmentally friendly and gives better cooling performance.

  • Embraco Compressor - EM2X3117U (Two Door), EM2X3125U (Three Door)

  • 220V

  • 304 Stainless Steel Countertops with thick core foam to aid in temperature loss from your refrigerator.

  • Black matte steel finish on the outside that has been chemically engineered with a vinyl substrate to prevent corrosion.

  • Double glazed tempered safety glass with self-closing lockable doors as standard.

  • Exterior LED light switch

  • Inbuilt countersunk stainless drip tray system with drainage tubes fitted. Font mounting hole(s) pre-fitted.