# Quick Start Guide

### <mark style="color:red;">IMPORTANT SETUP INFORMATION</mark>

<img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2FVxdiiQROSugMFK2KDNwx%2Fwarning-sign%20(1).png?alt=media&#x26;token=4e354f9b-bc8a-4fbf-8ac6-47aca86bc7fe" alt="" data-size="line"> **If kegerator has been moved/delivered do not turn it on unless it has been standing upright for at least 24 hours. Failure to do this will void warranty and may damage the kegerator. Leave the kegerator upright for at least 24 hours before plugging in mains power after receiving and unboxing**

<img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2FVxdiiQROSugMFK2KDNwx%2Fwarning-sign%20(1).png?alt=media&#x26;token=4e354f9b-bc8a-4fbf-8ac6-47aca86bc7fe" alt="" data-size="line">**Only tip kegerator onto right hand side (as seen from the front), when installing castors etc. Tipping the kegerator towards the inlet side of the compressor will decrease the chance of oil migrating into refrigerant line which can cause cooling and noise issues**

<img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2FVxdiiQROSugMFK2KDNwx%2Fwarning-sign%20(1).png?alt=media&#x26;token=4e354f9b-bc8a-4fbf-8ac6-47aca86bc7fe" alt="" data-size="line"> CO2 gas can be dangerous. Make sure to always use CO2 in a well ventilated space

<img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2FVxdiiQROSugMFK2KDNwx%2Fwarning-sign%20(1).png?alt=media&#x26;token=4e354f9b-bc8a-4fbf-8ac6-47aca86bc7fe" alt="" data-size="line"> Never exceed 40psi in your keg system

<img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2FVxdiiQROSugMFK2KDNwx%2Fwarning-sign%20(1).png?alt=media&#x26;token=4e354f9b-bc8a-4fbf-8ac6-47aca86bc7fe" alt="" data-size="line"> Always flush chemicals from the beer line completely before tapping keg

<img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2FVxdiiQROSugMFK2KDNwx%2Fwarning-sign%20(1).png?alt=media&#x26;token=4e354f9b-bc8a-4fbf-8ac6-47aca86bc7fe" alt="" data-size="line"> Always check for gas leaks once the kegerator is set up

<img src="https://66344119-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FJhj88FK6X4FnrYkWzTvI%2Fuploads%2FVxdiiQROSugMFK2KDNwx%2Fwarning-sign%20(1).png?alt=media&#x26;token=4e354f9b-bc8a-4fbf-8ac6-47aca86bc7fe" alt="" data-size="line"> <mark style="color:red;">**Ensure there is at least 100mm clearance on each side of the kegerator after installation. Failure to allow adequate clearance will impact cooling performance and void warranty**</mark>

### Inclusions

* [ ] 1 x KL07429 [MK4 KegLand Regulator](https://www.kegland.com.au/co2-gas-regulator-mk4-dual-gauge-multi-gas-type-30.html) or KL30670 [MK5 CO2 Regulator - Tool-Free](https://kegland.com.au/products/type-30-mk5-tool-free-co2-dual-gauge-regulator-6-5bar-prv-100psi-gauge)
* [ ] 1 x KL00192 [Black Plastic Wrap Around Drip Tray](https://www.kegland.com.au/series-4-replacement-wrap-around-drip-tray.html)
* [ ] 1 x KL00222 [Set of 4 Castor Wheels + bolts](https://www.kegland.com.au/series-4-replacement-1-5-inch-rubber-castor-wheels-4-set-including-2-with-brake.html). (2 x Front Locking, 2 Free Spinning)
* [ ] 1 x KL00215 [CO2 Cylinder Holder](https://www.kegland.com.au/co2-cylinder-bracket-holder-wall-mount.html) (designed to suit 2.6kg gas cylinder)
* [ ] 1 x KL00208 [Chrome Plated Guard Rail with rubber locking feet](https://www.kegland.com.au/replacement-guard-rail-for-series-x-series-4.html)
* [ ] 1 x KL15783 [Wire Shelf](https://www.kegland.com.au/replacement-wire-shelves-shelf-for-series-x-kegerator.html) (included if you want to convert it back to a can/bottle fridge)
* [ ] 1 x KL24051 [Carbonation Chart Sticker](https://www.kegland.com.au/the-kegland-carbonation-chart-sticker.html)

### <mark style="color:red;">**IMPORTANT**</mark>

* [ ] **After unboxing Series X kegerator, ensure it is left upright and stationary for at least 24 hours before turing on. This allows any oil from the compressor that may have migrated during transit to settle. Failure to do this will void warranty**
* [ ] **It is a good idea to install the castor wheels immediately after unboxing. Once installed, leave the Series X kegerator upright and undisturbed for 24 hours to allow oil etc to settle before plugging into mains power**
* [ ] **Only tip kegerator onto right hand side (as seen from the front), when installing castors. Tipping the kegerator towards the inlet side of the compressor will decrease the chance of oil migrating into refrigerant line which can cause cooling and noise issues**
* [ ] **The Series X.1 Kegerator requires a minimum of 100mm clearance on each side to allow adequate ventilation for heat egress. Failure to allow adequate clearance will impact cooling performance and void warranty.**

  **Note**: When actively cooling, the sides of the kegerator can get quite warm/hot. This is normal and indicates that the kegerator is cooling properly.

### Setup <a href="#setup" id="setup"></a>

Please refer to this video for a detailed guide to setting up a kegerator.

{% embed url="<https://www.youtube.com/embed/weO0rwg4ps4>" %}

For detailed, step by step instructions, read on!