Quick Start Guide
HIZO NEO E13 Pizza Oven | Quick Start Guide
Last updated
HIZO NEO E13 Pizza Oven | Quick Start Guide
Last updated
CAUTION: This Oven is designed to be used with 220-240V outlets only. If you using an extension cord, make sure that its marked electrical rating is at least as per the appliance's electrical rating (2140W).
POWER SUPPLY LEAD
A short power supply lead is provided to reduce the hazards of entanglement or tripping over a longer cord. Longer detachable power-supply cords or extension cords may be used if care is exercised in their use.
If an extension cord is used:
1. The marked electrical rating of the extension lead should be at least as great as the electric rating of the appliance.
2. The lead should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.
3. If the appliance is of the grounded type, the extension leadshould be a grounded type 3-wire lead.
4. Outdoor extension leads should be used with outdoor use products and are surface marked with the suffix letter "W" and with a tag stating "Suitable for use with outdoor appliances." The connection to an extension cord should be kept dry and off the ground.
CAUTION: This oven comes with two temperature sensors on the side wall and the bottom of the oven's cavity. Avoid hitting the temperature sensors when placing the pizza stone into inside of the oven.
Make sure there is enough space on the right hand side to access the ON/OFF Switch. Make sure there is sufficient clearnace at the front to allow the oven's door to fully open. The area above the oven should be clear.
DO NOT place oven inside an enclosed space.
Turn on the ON/OFF Switch on the side. The Power Icon light will come on and the oven will enter Standby Mode.
Touch the Power Icon to quit STandby Mode and activate Preset Mode Display
Touch the Power Icon on the front panel of the oven to power off the oven. The oven will switch into Standby Mode. In standby mode the oven fans continue to run in order to rapidly cool the oven and its electronics. Please wait until it cools down fully.
NOTE:I f the oven hasn't been used for 45 minutes, it will switch into Standby Mode to conserve energy and will automatically enter a cool-down cycle.
1. Rotate the Temperature Knob clockwise to select the Preset Mode you want.
2. Once the desired temperature or Mode is selected the oven will begin preheating.
3. To activate Manual Mode, keep rotating the Temperature Knob to select your ideal target temperature. Clockwise to increase the target temperature or anticlockwise to decrease the target temperature.
4. In Manual Mode, the temperature can be set from l00°C to 450°C (Min to Max)
NOTE: For safety every time the target temperature is reached the alarm will sound as a reminder
1. The Temperature Icon and Current Temperature will flash during heating.
2. The Target Temperature will be a single solid bar on the display.
3. The flashing Scale or Figure shows Current Temperature.
4. Behind the Current Temperature, solid scales and figures show the progress to Target Temperature during heating up.
5. After reaching Target Temperature all scales and figures will be solid, and oven will beep to indicate it is ready for cooking.
1. To monitor the oven's temperature and performance, the oven will sound a long alarm for several seconds if the temperature drops or exceeds the set temperture during operation.
2. When the temperature drops below the set temperature, the oven elements will turn back on to heat up. The Current Temperature display will flash until it reaches the Target Ternperature.
3. When over temperature, the oven will stop heating up until the Target Temperature is reached. If safe and in a closely supervised situation, opening the door helps with decreasing the temperature inside.
CAUTION: The inner surfaces of the door can be extremely hot! Only use the handle when opening and closing the door.
WARNING: Close supervision is necessary when any appliance is used by or near children. Keep the appliance and its lead out of reach of children.
4. The oven always automatically adjusts its power to keep Target Ternperature.
5. After reaching Target Temperature all scales and figures will be solid, and oven will beep and is ready for cooking.
The Power Knob in the middle shifts power between the top heat elements of air and the bottom heat element (pizza stone). This can be adjusted to suit cooking style and desired cooking outcome.
1. Rotate the Power Knob clockwise to increase the power to the bottom element (pizza stone) and decrease power to the top element (oven air temperature).
2. Rotate the Power Knob anticlockwise to increase the power to the top element (oven air temperature) and decrease power to the bottom element (pizza stone)
3. The Power Balanace Adjustment can be adjusted at any point during cooking.
NOTE: The Power Balance will be set automatically when using the preset temperature modes. If seting this manually to acheive the desired outcome some experimentation may be required to acheive the best combination of heat and power output.
NOTE: This function works in conjunction with the Timer.
The Off-Delay Function will turn the oven off once the timer has completed.
1. Press and hold Timer Knob for 3 seconds to activate the OFF-DELAY function. The Red Power Icon Timer Icon will illuminate when the Off-Delay Function is activated.
2. When timer countdown complete, the oven will quit the current Mode and return to Standby Mode. Both elements will turn off.
3. Press and hold Timer Knob for 3 seconds again to deactivate OFF-DELAY function. The Red Power Icon will turn off.
NOTE: The Timer function is independent of the oven operation. When the timer finishes counting down, the oven will beep and will keep operating to maintaining the target temperature. You can activate the OFF-DELAY Function to link Timer function with the Power Switch. When the OFF DELAY function is activated, the oven will turn back into Standby Mode after finishing the timer countdown.
1. Rotate the Timer Knob clockwise to increase the length of the timer (up to 20 minutes).
2. Rotate the Timer Knob anticlockwise to decrease the length of the timer.
3. The Timer allows you to choose 30 second increments when timer duration is under 4 minutes to allow better accuracy when cooking pizza.
4. Press the Timer Knob to confirm or cancel the timer function.
5. Timer scales and figures will be flash when shifting timer. Timer will be confirmed if there is inactivity for 3 seconds.
6. The oven will always alarm with "beep" when finishing countdown. Pressing or slightly rotating timer knob will stopthe alarm and activate timer function to ready mode again.
WARNING: Before turning off the ON/OFF switch or disconnecting from the outlet, let the oven cool down fully in Standby Mode. This will take around 10 minutes.
WARNING: Before moving the oven, leave oven to cool for at least 90 minutes.
