LogoLogo
  • Product Documentation
  • Kegging Equipment
    • Series X User Guide
      • Quick Start Guide
      • Preparation & Setup
        • Keg Types
          • Guide to Commercial Kegs & Couplers
          • Guide to Homebrew/Cornelius Kegs & Disconnects
      • Font Kit Assembly
        • Single, Double and Triple Font Kits
        • Quad Font Kits
        • Tee Bar Font Kits
      • Leak & Pressure Testing
      • Balancing Lines & CO2 Pressure
      • Installation Diagrams
      • Operation
      • Troubleshooting
    • Series X Plus User Guide
      • Quick Start Guide
      • Preparation & Setup
        • Keg Types
          • Guide to Commercial Kegs & Couplers
          • Guide to Homebrew/Cornelius Kegs & Disconnects
      • Font Kit Assembly
        • Single, Double and Triple Font Kits
        • Quad Font Kits
        • Tee Bar Font Kits
        • Super Slim Font Kits
        • Modular Fonts
      • Leak & Pressure Testing
      • Balancing Lines & CO2 Pressure
      • Installation Diagrams
      • Operation
      • Troubleshooting
    • Series 4 User Guide
      • Quick Start Guide
      • Preparation & Setup
        • Keg Types
          • Guide to Commercial Kegs & Couplers
          • Guide to Homebrew/Cornelius Kegs & Disconnects
      • Font Kit Assembly
        • Single, Double and Triple Font Kits
      • Leak & Pressure Testing
      • Balancing Lines & CO2 Pressure
      • Installation Diagrams
      • Operation
      • Troubleshooting
    • KegLand Undercover / Build In / Semi-Integrated Kegerator | Quick Start Guide
      • Preparation & Installation
      • Setup
        • Keg Types
          • Guide to Commercial Kegs & Couplers
          • Guide to Homebrew/Cornelius Kegs & Disconnects
      • Font Kit Assembly
        • Single, Double and Triple Font Kits
        • Quad Font Kits
        • Tee Bar Font Kits
      • Leak & Pressure Testing
      • Balancing Lines & CO2 Pressure
      • Installation Diagrams
      • Operation
      • Troubleshooting
    • Grand Deluxe 3 | Quick Start Guide
      • Specifications
      • Setup & Assembly
      • Installation Diagrams
      • Operation
      • Troubleshooting
  • Brewing Equipment
  • Fermentation Equipment
  • Distilling Equipment
  • benchy range
    • Benchy Sparkling Zero User Manual
      • Technical Specifications
      • Warnings and Installation Checklist
      • Connections & Plumbing
      • Benchy Sparkling Initial Startup Procedure
      • Troubleshooting
      • Warranty (Australia)
  • Pizza | BBQ | Smokers
    • HIZO NEO E13 Pizza Oven User Manual
      • Safety Instructions
      • Parts & Accessories
      • Quick Start Guide
      • Cooking Functions
      • Settings Guide
      • Troubleshooting
      • Error Codes
      • Cleaning & Maintenance
  • Cleaning & Packaging
Powered by GitBook
On this page
  • Technical Specifications
  • Safety Instructions
Export as PDF
  1. Pizza | BBQ | Smokers
  2. HIZO NEO E13 Pizza Oven User Manual

Safety Instructions

HIZO NEO E13 Pizza Oven | Safety Instructions

PreviousHIZO NEO E13 Pizza Oven User ManualNextParts & Accessories

Last updated 5 months ago

Technical Specifications

13" Electric Pizza Oven | Dual Zone Digital Control

MODEL
HIZO-E13-A-NEO

VOLTAGE

220-240V ~ 50/60Hz

POWER

1800-2140W

TEMPERATURE

100°C~450°C

DIMENSIONS

600x520x280 (DxWxH)

Safety Instructions

Indicates that the marked area can be hot and should not be touched without taking care

DO NOT touch hot surfaces. Use handles or knobs

Remove and safely discard all packing materials immediately upon unpacking to eliminate a choking hazard for young children

DO NOT immerse cord, plugor oven body in water or other liquid to protect against electric shock

Close supervision is necessary when any appliance is used by or near children. Keep the appliance and its cord out of reach of children

DO NOT use this appliance for anything other than its intended use. Misuse may cause injury.

DO NOT use this appliance near the edge of a counter or table. Ensure the surface is stable, level, dry, heat-resistant and clean.

DO NOT use oils/fats, such as butter, olive oil, and margarine, when cooking over 260°C to avoid the risk of smoke and property damage due to smoke.

DO NOT use this appliance on (or close to) a hot gas or electric burner.

DO NOT let the power cord hang over the edge of a table or counter, touch hot surfaces or become knotted or tangled.

Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.

DO NOT operate the appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged inany manner.

DO NOT lay cooking utensils, pans or dishes on the glass door.

DO NOT store any item on top of the oven when in operation.

Extreme caution must be used when moving appliance containing hot oil or other hot liquids.

Keep the oven clean and DO NOT allow excess grease or ash to collect inside. Doing so significantly increases the chances of a grease fire and additional smoke which taint the flavor of the food.

When choosing a place to use your oven, make sure there is room for adequate ventilation on all sides.

DO NOT cover any part of the oven with metal foil. This will cause overheating of the oven.

DO NOT rest anything on the door once open. Avoid items dropping onto the inside of the door.

This appliance can't be used or cleaned by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge.

Children shall not play with the appliance.

Refer here for user maintenance.

Refer here for cleaning surfaces in contact with food.

Household use only

This appliance is intended to be used in household and similar applications such as:

- staff kitchen areas in shops, offices and other working environments;

-farm houses;

-by clients in hotels, motels and other residential type environments;

-bed and breakfast type environments.

Warning Improper use of the grounding plug can result in electric shock. To prevent electric shock, unplug before cleaning

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

The appliance is not intended to be operated by means of an external timer or separate remote-control system.

Hot Surface Warning