All pages
Powered by GitBook
1 of 1

Loading...

Quick Start Guide

Series X Plus User Guide | Quick Start Guide

IMPORTANT SETUP INFORMATION

If kegerator has been moved/delivered do not turn it on unless it has been standing upright for at least 24 hours. Failure to do this will void warranty and may damage the kegerator. Leave the kegerator upright for at least 24 hours before plugging in mains power after receiving and unboxing

Only tip kegerator onto right hand side (as seen from the front), when installing castors etc. Tipping the kegerator towards the inlet side of the compressor will decrease the chance of oil migrating into refrigerant line which can cause cooling and noise issues

CO2 gas can be dangerous. Make sure to always use CO2 in a well ventilated space

Never exceed 40psi in your keg system

Always flush chemicals from the beer line completely before tapping keg

Always check for gas leaks once the kegerator is set up

Ensure there is at least 100mm clearance on each side of the kegerator after installation. Failure to allow adequate clearance will impact cooling performance and void warranty

Inclusions

NOTE: The Series X Plus does not include a wire shelf. The are suitable if you wish to add a shelf

Please refer to this video for a detailed guide to setting up a kegerator.

The following video is for a standard Series X setup, but includes useful information regarding duotight disconnect fittings and other products

For detailed, step by step instructions, read on!

Note: When actively cooling, the sides of the kegerator can get quite warm/hot. This is normal and indicates that the kegerator is cooling properly.

IMPORTANT

Setup

MK4 KegLand Regulator
MK5 CO2 Regulator - Tool-Free
Black Plastic Wrap Around Drip Tray
Set of 6 Castor Wheels + bolts
CO2 Cylinder Holder
Series X Plus - Replacement Guard Rail
Carbonation Chart Sticker
Kegerator Modular Wire Shelf Set (3 Pieces)
Series X Plus Installation Video