Quick Start Guide

IMPORTANT SETUP INFORMATION

If kegerator has been moved/delivered do not turn it on unless it has been standing upright for at least 24 hours. Failure to do this will void warranty and may damage the kegerator. Leave the kegerator upright for at least 24 hours before plugging in mains power after receiving and unboxing

Only tip kegerator onto right hand side (as seen from the front), when installing castors etc. Tipping the kegerator towards the inlet side of the compressor will decrease the chance of oil migrating into refrigerant line which can cause cooling and noise issues

CO2 gas can be dangerous. Make sure to always use CO2 in a well ventilated space

Never exceed 40psi in your keg system

Always flush chemicals from the beer line completely before tapping keg

Always check for gas leaks once the kegerator is set up

Ensure there is at least 100mm clearance on each side of the kegerator after installation. Failure to allow adequate clearance will impact cooling performance and void warranty

• 1 x KL07429 or KL30670

• 1 x KL00192

• 1 x KL00222 . (2 x Front Locking, 2 Free Spinning)

• 1 x KL00215 (designed to suit 2.6kg gas cylinder)

• After unboxing Series 4 kegerator, ensure it is left upright and stationary for at least 24 hours before turing on. This allows any oil from the compressor that may have migrated during transit to settle. Failure to do this will void warranty

• It is a good idea to install the castor wheels immediately after unboxing. Once installed, leave the Series 4 kegerator upright and undisturbed for 24 hours to allow oil etc to settle before plugging into mains power

• Only tip kegerator onto right hand side (as seen from the front), when installing castors. Tipping the kegerator towards the inlet side of the compressor will decrease the chance of oil migrating into refrigerant line which can cause cooling and noise issues

Please refer to this video for a detailed guide to setting up a kegerator.

This video is specific to a Series X.1 kegerator, but is worth watching as it has a lot of up to date information about duotight fittings etc.

For detailed, step by step instructions, read on!