HIZO One-Shot Instant Read Folding Thermometer Pen

Features

- Rotating 180° Screen - Backlight - 304 Stainless Steel Folding Thermocouple (Not Thermistor) - Probe Type: Penetration - Temperature Range: -50­°C to 300°C (-58°F to 572°F) - Temperature Accuracy: +/- 0.5°C (0.9°F) - Reading Speed: 2 Seconds - Auto-Off: 3 minutes - Resolution 0.1°C (0.1°F) - Requires 1 x AAA Battery. - Includes small screw driver for battery case

Dimensions: 165mm (Long) 40mm (Wide) x 22mm (Thick)

Thermocouple Probe: 105mm Long

Controls

• LOCK: Short press the LOCK button to lock the currently displayed temperature

• BACKLIGHT: Short press the BACKLIGHT button to illuminate the display. Short press again to turn the backlight off. The backlight will automatically turn off after 10 seconds

• CELSIUS or FAHRENHEIT Display: Long press the

• Open the battery compartment (6) by removing the Phillips head screew with a suitable screwdriver. The thermometer requires 2 x AAA batteries. Ensure correct polarity when installing batteries

• Open the probe to turn on the thermometer.

• Closing the probe turns the thermometer off. If left open, the therm,ometer will power off after ~ 10 minutes

1. Bring a pot of water to a boil. Once boiling, turn down to maintain a simmer at 100°C

2. Hold the LOCK button while opening the probe to enter 100°C Calibration Mode. The screen displays CAL. After CAL flashes for 3 seconds, the current temperature is displayed and flashes.

3. Insert the probe into the pot of simmering water at 100°C

• Clean the probe after each use to avoid incorrect readings

• This is a handheld thermometer - do not use in a hot oven

• If measuring extremely hot food or liquids (over 300°C) do not leave the probe in contact for longer than 60 seconds