# All Grain Recipe Kit - David Heath - Tropical Hazy Pale Ale - KB49201
### David Heath | Tropical Hazy Pale Ale
**KegLand are super excited to bring you a range of All Grain Recipe Kits from our great friend David Heath!**
David will be well known to most of you from the [David Heath Homebrew YouTube channel](https://www.youtube.com/c/DavidHeathHomebrew) - he has been producing fantastic brewing videos for a long time now.
KegLand are excited to bring you a range of All Grain Recipe Kits from our friend David Heath! This is a superb Hazy Pale Ale featuring Citra, Mosaic and Galaxy
{% tabs %}
{% tab title="Included - Single Batch" %}
* [ ] 3 x KL36016 [Citra - (25g Pellet Hop)](https://kegland.com.au/products/citra-25g-pellet-hop)
* [ ] 1 x KL36023 [Galaxy - (25g Pellet Hop)](https://kegland.com.au/products/galaxy-25g-pellet-hop)
* [ ] 6 x KL36061 [Mosaic - (25g Pellet Hop)](https://kegland.com.au/products/mosaic-25g-pellet-hop)
* [ ] 2 x KL39406 [Motueka - (25g Pellet Hop)](https://kegland.com.au/products/motueka-25g-pellet-hop)
* [ ] 1 x KL40655 [LalBrew Premium Series - Pomona Hybrid IPA Yeast x 11g](https://kegland.com.au/products/lalbrew-premium-series-pomona-hybrid-ipa-yeast-x-11g)
* [ ] 1 x All Grain Recipe Kit Grain Bill
3.2kg x Maris Otter - Simpsons (UK) - per kg\
1.04kg x Munich - Barrett Burston (AUS) - per kg\
0.24kg x Caramalt - Barrett Burston (AUS) - per kg\
0.24kg x Wheat Malt - Barrett Burston (AUS) - per kg
{% endtab %}
{% tab title="Included - Double Batch" %}
* [ ] 5 x KL36016 [Citra - (25g Pellet Hop)](https://kegland.com.au/products/citra-25g-pellet-hop)
* [ ] 6 x KL36023 [Galaxy - (25g Pellet Hop)](https://kegland.com.au/products/galaxy-25g-pellet-hop)
* [ ] 12 x KL36061 [Mosaic - (25g Pellet Hop)](https://kegland.com.au/products/mosaic-25g-pellet-hop)
* [ ] 4 x KL39406 [Motueka - (25g Pellet Hop)](https://kegland.com.au/products/motueka-25g-pellet-hop)
* [ ] 2 x KL40655 [LalBrew Premium Series - Pomona Hybrid IPA Yeast x 11g](https://kegland.com.au/products/lalbrew-premium-series-pomona-hybrid-ipa-yeast-x-11g)
* [ ] 1 x All Grain Recipe Kit Grain Bill
6.4kg x Maris Otter - Simpsons (UK) - per kg\
2.08kg x Munich - Barrett Burston (AUS) - per kg\
0.48kg x Caramalt - Barrett Burston (AUS) - per kg\
0.48kg x Wheat Malt - Barrett Burston (AUS) - per kg
{% endtab %}
{% tab title="Brew Specification" %}
* Volume (single batch): 21L
* Volume (double batch): 42L
* IBU's: 37
* OG: 1.052
* FG: 1.010
* ABV: 5.5
* Colour (EBC): 11.6
{% endtab %}
{% tab title="Recommended" %}
#### Recommended Equipment
* [ ] Brewery: [Gen 4.1 BrewZilla 35L](https://kegland.com.au/products/brewzilla-35l-gen-4?_pos=12&_sid=4b7b836ab&_ss=r) or[ Gen 4.1 BrewZilla 65L ](https://kegland.com.au/products/brewzilla-65l-gen-4?_pos=12&_sid=af72b24e9&_ss=r)
* [ ] [Heavy Duty Brewing Gloves](https://www.kegland.com.au/heavy-duty-brewing-gloves.html)
* [ ] [Stainless Steel Mash Paddle](https://kegland.com.au/products/stainless-steel-mash-paddle-61cm-light-duty?_pos=1&_sid=ed699357a&_ss=r)
* [ ] Cooling Wort: [Red Reaper Counter Flow Chiller Garden Hose & Camlock Kit](https://kegland.com.au/products/red-reaper-counter-flow-chiller-garden-hose-brewzilla-kit?_pos=1&_sid=0ccc582e6&_ss=r)
* [ ] No Chill: [20L Cube for Hot Cube with Lid](https://kegland.com.au/products/20l-cube-for-hot-cube-wort-storage-low-wines-stripping-run?_pos=16&_sid=8bb001b2f&_ss=r)
* [ ] Fermenter: [Fermzilla All Rounder](https://kegland.com.au/products/30l-fermzilla-all-rounder-pressure-brewing-kit?_pos=1&_psq=all+rounder&_ss=e&_v=1.0) OR [FermZilla Tri-Conical](https://kegland.com.au/products/27l-fermzilla-tri-conical-pressure-brewing-kit?_pos=1&_psq=27L&_ss=e&_v=1.0)
* [ ] Temperature Control: [RAPT Fermentation Chamber](https://kegland.com.au/products/rapt-temperature-controlled-fermentation-chamber?_pos=1&_psq=fermenta&_ss=e&_v=1.0) OR [RAPT Temperature Controller](https://kegland.com.au/products/rapt-temperature-controller-standard-10amp-socket?_pos=2&_psq=temperature+co&_ss=e&_v=1.0)
* [ ] Refractometer: [Saber LED Refractometer](https://kegland.com.au/products/led-three-scale-refractometer-with-atc-brix-sg-sugar-sg-wort?_pos=2&_sid=3d8362132&_ss=r)
* [ ] Packaging: [Ball Lock Kegs](https://kegland.com.au/products/19l-new-ball-lock-keg-free-beverage-tag-low2-o-ring?_pos=2&_psq=ball+lock+ke&_ss=e&_v=1.0), [Oxebar Kegs](https://kegland.com.au/products/oxebar-20l-amber-pet-keg-pressure-fermenter-tank?_pos=1&_psq=oxebar&_ss=e&_v=1.0), [Bottles ](https://kegland.com.au/products/kegland-amber-pet-bottles-500ml-pack-of-24-with-screw-caps?_pos=1&_psq=pet+bott&_ss=e&_v=1.0)or [Cans](https://kegland.com.au/products/330ml-360-full-aperture-aluminium-disposable-beverage-beer-cans-black-skin-with-b64-lids-300-units?_pos=2&_psq=330&_ss=e&_v=1.0)
#### Recommended Supplies
* [ ] Cleaning Chemicals: [StellarClean](https://kegland.com.au/products/stellarclean-pbw-powerful-brewing-wash-brewery-cleaner-beer-line-cleaner-keg-wash-1kg-35oz?_pos=2&_psq=stellar&_ss=e&_v=1.0) OR [StellarOxy](https://kegland.com.au/products/stellaroxy-100-sodium-percarbonate-1kg-35oz?_pos=5&_psq=stellar&_ss=e&_v=1.0)
* [ ] Non-Rinse Sanitiser: [StellarSan](https://kegland.com.au/products/stellarsan-sanitiser-500ml-phosphoric-based-similar-to-starsan?_pos=1&_psq=stellar&_ss=e&_v=1.0)
* [ ] Instant Sanitising Spray: [Ethyl Sanitiser Spray](https://kegland.com.au/products/super-kill-ethyl-sanitiser-spray-1000ml-ethanol-alcohol?_pos=1&_psq=ethy&_ss=e&_v=1.0)
* [ ] [Brewing Salts Starter Kit](https://kegland.com.au/products/brewing-salts-starter-kit)
* [ ] [Whirlfloc](https://www.kegland.com.au/products/whirlfloc-granulated-powder-100g-133-batches-worth?_pos=2&_sid=bc7ffcadb&_ss=r)
{% endtab %}
{% endtabs %}
### **BrewFather Recipe Details**
[**Single Batch (35l BrewZilla)**](https://share.brewfather.app/yrNJ7uijzWh4ZH)
[**Double Batch (65L BrewZilla)**](https://share.brewfather.app/JM1ErFXNhCN3mc)
### Cleaning & Sanitation
First, clean all equipment if not already ready clean.
We recommend using [StellarClean PBW](https://kegland.com.au/products/stellarclean-pbw-powerful-brewing-wash-brewery-cleaner-beer-line-cleaner-keg-wash-1kg-35oz?_pos=2&_psq=stellar&_ss=e&_v=1.0) for this. All 'cold side' equipment - spoon, fermenter, airlock, bottles etc must also be
sanitised. All equipment that will come into contact with your brew *post* boil must be sanitised with a quality no-rinse sanitiser such as [StellarSan](https://kegland.com.au/products/stellarsan-sanitiser-500ml-phosphoric-based-similar-to-starsan?_pos=1&_psq=stellar&_ss=e&_v=1.0). For sanitising external fittings we recommend [Ethanol Spray](https://www.kegland.com.au/ethyl-sanitiser-spray-1000ml.html)
*Refer to the instructions on the label of your no-rinse sanitiser for dosage and usage instructions.*
### Mash
1. Heat the strike water to the right temperature to achieve the correct mash temperature. Typically this will be 6-8°C higher than the mash temperature, although brewing system, size of grain bill and ambient temperature can have an effect. You can use [this calculator](https://web.brewfather.app/tabs/tools/strike-temperature) on Brewfather.
2. (Optional) Add the [brewing salts](https://kegland.com.au/products/brewing-salts-starter-kit?_pos=1&_sid=ee4c31ee3&_ss=r) (if using) to the strike water. **The salt additions are based on an RO water profile**. If using another source of water, checkout the water calculator on [Brewfather](https://web.brewfather.app/)
3. Once strike temperature is achieved, add your milled malt and stir thoroughly to ensure there are no dough balls. Check the mash temperature and adjust as needed.
4. Let the grain bed sit for 10 minutes, then begin recirculation.
5. (Optional) Check mash pH and adjust with acid as required.
6. Follow the **Mash** profile in the table below. Towards the end of the mash, preheat sparge water to 75°c.
7. (Optional) Raise the temperature to 75°C for a Mash Out step and hold for 10 minutes.
8. Once the mash is complete, lift the malt pipe and allow the wort to drain into the kettle.
9. Add your sparge water at 75°C to the malt pipe, until you reach pre-boil volume.
{% tabs %}
{% tab title="Mash Profile - Single Batch" %}
{% endtab %}
{% endtabs %}
### Boil
1. Bring your wort to a boil. Set your temperature *above* 100°c to ensure a constant boil - this will ensure the elements stay on. Keep an eye on the kettle as you raise towards a boil to avoid a messy boil over
2. Once a rolling boil is reached start your timer.
3. Add hops as required according to the **Boil Schedule**. (A 60 minute addition is boiled for 60 minutes, a 10 minute addition is added with 10 minutes left to the end of the boil).
4. (Optional) If using [whirfloc ](https://kegland.com.au/products/whirlfloc-granulated-powder-100g-133-batches-worth?srsltid=AfmBOory5qT-3uBbyD7QoLd_szcGdcV0IxOOEJU807sdTqBXwnwEVEH6)and [yeast nutrient](https://kegland.com.au/products/yeast-nutrient-powder-100g?_pos=3&_psq=nutrient&_ss=e&_v=1.0), add these with 15 minutes left in the boil.
5. **Chilling:** Do the following with 10 minutes left of the boil to sanitise the chiller:\
If using an immersion chiller, insert this into the kettle. \
If using a counterflow or plate chiller connect them to the kettle pump and begin recirculating.
6. **For whirlpool hops (when required) you will get the best result cooling
the wort to around 80°C first.**
7. **No Chill:** If doing the No-Chill method with a Whirlpool Hop addition, we recommend stirring the kettle until the temperature drops below at least 90°c to minimise additional bitterness extraction. Then transfer to your cube or bladder and allow wort to cool to ambient. If there are no whirlpool hops transfer thew beer as soon as the boil is finished. **NOTE**: No Chill can impact bitterness levels due to extended time at above isomerisation temperatures. We recommend cutting the boil hop time in half to compensate (so a 60 minute addition becomes 30 minutes, etc)
8. **Chilling:** Use your desired chilling method to get the wort close to pitching temperature or a few degrees above ground water temperature and then transfer to a clean and sanitised fermenter.
| Boil Schedule | Units |
| ------------- | ---------- |
| **Boil Time** | 60 minutes |
| SIngle Batch Hop Addition | Time (Chill Method) | Time (No Chill Method) |
| ------------------------- | ------------------------ | ------------------------ |
| **6g Citra hops** | 15 | 7 |
| **5g Galaxy hops** | 15 | 7 |
| **90g Mosaic hops** | Whirlpool for 15 minutes | Whirlpool for 15 minutes |
| **70g Galaxy hops** | Whirlpool for 15 minutes | Whirlpool for 15 minutes |
| Double Batch Hop Addition | Time (Chill Method) | Time (No Chill Method) |
| ------------------------- | ------------------------ | ------------------------ |
| **12g Citra hops** | 15 | 7 |
| **10g Galaxy hops** | 15 | 7 |
| **180g Mosaic hops** | Whirlpool for 15 minutes | Whirlpool for 15 minutes |
| **140g Galaxy hops** | Whirlpool for 15 minutes | Whirlpool for 15 minutes |
### Pitch The Yeast
Ideally, the temperature of the wort should be at pitching temp before adding the yeast. If the wort is too hot then sit the fermenter in an ice bath or fermentation fridge until the temperature of the wort has cooled down to close to the target pitching temperature.
| Target Pitching Temperature |
| --------------------------- |
| 18°c |
Ensure that the lid remains on the fermenter as much as possible and the thermometer is sanitised prior to each measurement to avoid contamination of your beer
**Add the entire contents of the yeast sachet(s) to your fermenter by gently sprinkling the yeast across the top of the wort**
### Fermentation
This step is the most important to get great tasting finished beer. Half fill your
\
airlock or blow-off jar with no-rinse sanitiser at the correct dilution.
#### Fermentation *with* Temperature Control
Use the schedule below as your target temperatures throughout fermentation. If possible adjust the temperature in accordance with gravity changes rather than timed steps for the fastest and healthiest fermentation. A [RAPT Pill](https://kegland.com.au/products/yellow-rapt-pill-hydrometer-thermometer-wifi-bluetooth?_pos=1&_psq=pill&_ss=e&_v=1.0) is a great way to make this easy!
Raising the temperature at the end of fermentation is known as a diacetyl rest, and is important to ensure full attenuation and to allow the yeast to clean up the off flavours that can be produced as a result of fermentation.
| Gravity Step | Time Step | Target Temperature |
| ------------------ | ------------------ | --------------------- |
| SG-1.025 | Day 0-4 | 18°c |
| 1.025-1.014 | Day 4-7 | 22°c Ramp over 3 days |
| Until FG Stablises | Until FG Stablises | 24°c |
| Recommended RAPT Fermentation Profile |
| -------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Yeast Specific RAPT Profile:** [**Lallemand Pomona Ale Yeast**](https://app.rapt.io/profiles/edit/5e5eaad2-327a-4c23-ca76-08dc4115188c) |
| **Automated RAPT Ale Yeast Profile - Bluetooth Bonded Pill ONLY:** [Ale Yeast Auto Profile](https://app.rapt.io/profiles/view/a24c7e0c-38d5-46bb-2f88-08dd8b33c3a9) |
#### Fermentation *without* Temperature Control
Try to maintain the fermentation within the yeast's ideal temperature range until fermentation is nearly complete, at which stage the fermenter can be moved somewhere warmer for the diacetyl rest.
| Ideal Minimum Temperature | Ideal Maximum Temperature |
| ------------------------- | ------------------------- |
| 18°c | 24°c |
\
An easy way to get consistently great beer is to get a cheap/free fridge from Gumtree or FaceBook and make a fermentation chamber paired with a [Fermentation Heating Wrap Belt](https://kegland.com.au/products/fermentation-heating-wrap-belt-with-velcro-strap-30watts?_pos=2&_sid=b3fc270f6&_ss=r) and controlled by a [RAPT Temperature Controller](https://kegland.com.au/products/rapt-temperature-controller-standard-10amp-socket?_pos=1&_psq=rapt&_ss=e&_v=1.0). Otherwise, buy a ready to go [RAPT Fermentation Chamber](https://kegland.com.au/products/rapt-temperature-controlled-fermentation-chamber?_pos=1&_psq=chamber&_ss=e&_v=1.0) for the ultimate in fermentation control. Using a [RAPT Pill Hydrometer](https://kegland.com.au/products/yellow-rapt-pill-hydrometer-thermometer-wifi-bluetooth) in conjunction with a RAPT Temperature Controller or Fermentation Chamber also unlocks automated profiles which takes all the guesswork out of fermentation control!
\\
\
**Note that if you are using a pressure capable fermenter you will get the best results at around 5-12psi. Allow pressure to build up with a spunding valve 24 hours after pitching. For healthy yeast it is important to not apply any pressure for the first 24 hours to avoid inhibiting yeast growth.**
### Dry Hop
Feel free to experiment with the dry hop - different times and temperatures will often give different results.
\\
\
For the best results in this recipe we recommend adding the dry hops according to the schedule below at the **end of fermentation** for 48 hours.
If you have temperature control, you can get great results when dry-hopping by dropping the temperature to 12-14°C for a 'soft crash'. Dry hop at this temperature for the recommended contact time, and then cold crash.
| Single Batch Dry Hop | Amount | Contact Time |
| -------------------- | ------ | ------------ |
| Citra | 50g | 5 days |
| Mosaic | 50g | 5 days |
| Motueka | 50g | 5 days |
| Double Batch Dry Hop | Amount | Contact Time |
| -------------------- | ------ | ------------ |
| Citra | 100g | 5 days |
| Mosaic | 100g | 5 days |
| Motueka | 100g | 5 days |
*The amount of hops added during the dry hop stage can be varied according to your taste. Any remaining hop pellets can be placed in the freezer in a zip-lock bag or vacuum sealed bag for a future brew.*
### Packaging Your Finished Beer
Once fermentation is done, it is time to transfer your finished beer! Ideally, cold crashing at -1°C for 3 days will give the best results before transferring. To determine that fermentation has finished, check the gravity over three consecutive days. If it is stable across three consecutive days then fermentation is done and the beer can be safely transferred to your bottles, cans or keg.
**Do not transfer until fermentation is complete.**
**During the packaging process the most important rule is to keep air in the form of oxygen out of the beer. Check out the links for best practice of how to do this depending on method used.**
* **Bottling your beer:** Use KegLand [Amber Glass Bottles with Swing/Flip Top Lids](https://kegland.com.au/products/500ml-amber-glass-bottles-pack-of-24-with-swing-flip-top-lids?_pos=2&_psq=KL20947&_ss=e&_v=1.0) or KegLand[ Amber PET Bottles with Screw Caps](https://kegland.com.au/products/kegland-amber-pet-bottles-500ml-pack-of-24-with-screw-caps?_pos=1&_psq=KL19866+&_ss=e&_v=1.0). Please refer to our detailed beginners guide for bottling from a fermenter [here](https://www.kegland.com.au/blog/post/a-beginners-guide-to-bottling-homebrew).
* **Kegging:** We would suggest carbonating and dispensing at 10-12 psi at 2°C for best results. Refer to our detailed beginners guide for kegging from a fermenter [here](https://www.kegland.com.au/blog/post/how-to-keg-your-beer-a-basic-guide).
* **Canning:** To transfer your finished beer into cans we would suggest kegging and carbonating at 11psi at 2°C then transferring to cans. Refer to our detailed beginners guide for canning [here](https://www.kegland.com.au/blog/post/how-to-can-your-beer-a-beginners-guide).
All done! Congratulations on making a delicious beer! Any questions - don't hesitate to contact the friendly staff on
