All pages
Powered by GitBook
1 of 1

Loading...

All Grain Recipe Kit - Spice Beer - Country Bumpkin Ale - KB18601

Country Bumpkin Ale - Spice Beer

Country meets Halloween! It is not something the majority of us celebrate, but why not enjoy in on the action and make an off-season pumpkin spice beer to celebrate anyway.

This recipe calls for butternut pumpkin (squash) and some spices if you have them. Unleash your inner country bumpkin with a new yearly tradition. Maybe throw on some Outlaw Country and yeehaw your way down on your quad bike to the ol' pumpkin' patch.

A traditional recipe that has evolved over the years, we highly recommend adding spices to this recipe to, well, spice it up!

We recommend trying any or all of the following. For best results, add the spices and flavourings to the last five minutes of the boil, but feel free to experiment with adding spices during fermentation (like a dry hop) instead!

Cassia Bark adds a lovely, earthy cinnamon flavour - around 25g is the sweet spot

If you're feeling particularly bold, a couple of Star Anise adds a fantastic licorice taste and aroma - not for the unwary though!

All Spice powder adds a flavour reminiscent of nutmeg, cloves and cinnamon

Nutmeg works beautifully as well

Ginger powder combines beautifully with the subtle richness of this brew

If adding spices, you may like to use a hop sock or Hop Spider to help contain the ingredients.

3.4kg x American Ale Malt (2-Row) - Gladfield (NZ) 0.44kg x Biscuit Malt - Gladfield (NZ) 0.34kg x Crystal Medium Malt - Simpsons (UK)

First, clean all equipment if not already ready clean.

We recommend using for this. All 'cold side' equipment - spoon, fermenter, airlock, bottles etc must also be sanitised. All equipment that will come into contact with your brew post boil must be sanitised with a quality no-rinse sanitiser such as . For sanitising external fittings we recommend

Refer to the instructions on the label of your no-rinse sanitiser for dosage and usage instructions.

  1. Heat the strike water to the right temperature to achieve the correct mash temperature. Typically this will be 6-8°C higher than the mash temperature, although brewing system, size of grain bill and ambient temperature can have an effect. You can use on Brewfather.

  2. (Optional) Add the (if using) to the strike water. The salt additions are based on an RO water profile. If using another source of water, checkout the water calculator on

  3. Once strike temperature is achieved, add your milled malt and the roasted pumpkin. Also add 2-3 (single batch) or 4-6 (double batch) handfuls of Rice Hulls and stir thoroughly to ensure there are no dough balls. Check the mash temperature and adjust as needed.

Mash Profile
Units
  1. Bring your wort to a boil. Set your temperature above 100°c to ensure a constant boil - this will ensure the elements stay on. Keep an eye on the kettle as you raise towards a boil to avoid a messy boil over

  2. Once a rolling boil is reached start your timer.

  3. Add hops as required according to the Boil Schedule. (A 60 minute addition is boiled for 60 minutes, a 10 minute addition is added with 10 minutes left to the end of the boil).

  4. (Optional) If using and , add these with 15 minutes left in the boil.

Boil Schedule
Units
SIngle Batch Hop Addition
Time (Chill Method)
Time (No Chill Method)
Double Batch Hop Addition
Time (Chill Method)
Time (No Chill Method)

Ideally, the temperature of the wort should be at pitching temp before adding the yeast. If the wort is too hot then sit the fermenter in an ice bath or fermentation fridge until the temperature of the wort has cooled down to close to the target pitching temperature.

Target Pitching Temperature

Ensure that the lid remains on the fermenter as much as possible and the thermometer is sanitised prior to each measurement to avoid contamination of your beer

Add the entire contents of the yeast sachet(s) to your fermenter by gently sprinkling the yeast across the top of the wort

This step is the most important to get great tasting finished beer. Half fill your airlock or blow-off jar with no-rinse sanitiser at the correct dilution.

Use the schedule below as your target temperatures throughout fermentation. If possible adjust the temperature in accordance with gravity changes rather than timed steps for the fastest and healthiest fermentation. A is a great way to make this easy!

Raising the temperature at the end of fermentation is known as a diacetyl rest, and is important to ensure full attenuation and to allow the yeast to clean up the off flavours that can be produced as a result of fermentation.

Gravity Step
Time Step
Target Temperature
Recommended RAPT Fermentation Profile

Try to maintain the fermentation within the yeast's ideal temperature range until fermentation is nearly complete, at which stage the fermenter can be moved somewhere warmer for the diacetyl rest.

Ideal Minimum Temperature
Ideal Maximum Temperature

An easy way to get consistently great beer is to get a cheap/free fridge from Gumtree or FaceBook and make a fermentation chamber paired with a and controlled by a . Otherwise, buy a ready to go for the ultimate in fermentation control. Using a in conjunction with a RAPT Temperature Controller or Fermentation Chamber also unlocks automated profiles which takes all the guesswork out of fermentation control! Note that if you are using a pressure capable fermenter you will get the best results at around 5-12psi. Allow pressure to build up with a spunding valve 24 hours after pitching. For healthy yeast it is important to not apply any pressure for the first 24 hours to avoid inhibiting yeast growth.

Once fermentation is done, it is time to transfer your finished beer! Ideally, cold crashing at -1°C for 3 days will give the best results before transferring. To determine that fermentation has finished, check the gravity over three consecutive days. If it is stable across three consecutive days then fermentation is done and the beer can be safely transferred to your bottles, cans or keg. Do not transfer until fermentation is complete.

During the packaging process the most important rule is to keep air in the form of oxygen out of the beer. Check out the links for best practice of how to do this depending on method used.

  • Bottling your beer: Use KegLand or KegLand. Please refer to our detailed beginners guide for bottling from a fermenter .

  • Kegging: We would suggest carbonating and dispensing at 10-12 psi at 2°C for best results. Refer to our detailed beginners guide for kegging from a fermenter .

  • Canning: To transfer your finished beer into cans we would suggest kegging and carbonating at 11psi at 2°C then transferring to cans. Refer to our detailed beginners guide for canning .

All done! Congratulations on making a delicious beer! Any questions - don't hesitate to contact the friendly staff on

6.8kg x American Ale Malt (2-Row) - Gladfield (NZ) 0.88kg x Biscuit Malt - Gladfield (NZ) 0.68kg x Crystal Medium Malt - Simpsons (UK)

  • Volume (single batch): 21L

  • Volume (double batch): 42L

  • IBU's: 34

  • OG: 1.047

  • FG: 1.008

  • ABV: 5.1

  • Colour (EBC): 28

Recommended Equipment

Let the grain bed sit for 10 minutes, then begin recirculation.
  • (Optional) Check mash pH and adjust with acid as required.

  • Follow the Mash profile in the table below. Towards the end of the mash, preheat sparge water to 75°c.

  • (Optional) Raise the temperature to 75°C for a Mash Out step and hold for 10 minutes.

  • Once the mash is complete, lift the malt pipe and allow the wort to drain into the kettle.

  • Add your sparge water at 75°C to the malt pipe, until you reach pre-boil volume.

  • 3g

    Mash pH

    5.25

    Pre-boil Volume

    25.9L

    Mash Temperature

    65°C

    Mash Profile
    Units

    Strike Water

    44.9L

    Sparge Water

    12L

    Calcium Chloride

    6.6g

    Epsom

    4.1g

    Chilling: Do the following with 10 minutes left of the boil to sanitise the chiller: If using an immersion chiller, insert this into the kettle. If using a counterflow or plate chiller connect them to the kettle pump and begin recirculating.

  • For whirlpool hops (when required) you will get the best result cooling the wort to around 80°C first.

  • No Chill: If doing the No-Chill method with a Whirlpool Hop addition, we recommend stirring the kettle until the temperature drops below at least 90°c to minimise additional bitterness extraction. Then transfer to your cube or bladder and allow wort to cool to ambient. If there are no whirlpool hops transfer thew beer as soon as the boil is finished. NOTE: No Chill can impact bitterness levels due to extended time at above isomerisation temperatures. We recommend cutting the boil hop time in half to compensate (so a 60 minute addition becomes 30 minutes, etc)

  • Chilling: Use your desired chilling method to get the wort close to pitching temperature or a few degrees above ground water temperature and then transfer to a clean and sanitised fermenter.

  • Strike Water

    21.4L

    Sparge Water

    6.9L

    Calcium Chloride

    3.8g

    Epsom

    2.9g

    Boil Time

    60 minutes

    25g Hallertau Blanc hops

    60

    30

    250g Dark Brown Sugar

    10

    10

    25g Cassia Bark (optional)

    10

    10

    50g Hallertau Blanc hops

    60

    30

    500g Dark Brown Sugar

    10

    10

    50g Cassia Bark (optional)

    10

    10

    18°c

    SG-1.025

    Day 0-4

    18°c

    1.025-1.014

    Day 4-7

    22°c Ramp over 3 days

    Until FG Stablises

    Until FG Stablises

    24°c

    Yeast Specific RAPT Profile: CellarScience - CALI American Ale Yeast

    Automated RAPT Ale Yeast Profile - Bluetooth Bonded Pill ONLY: Ale Yeast Auto Profile

    18°c

    24°c

    BrewFather Recipe Details

    Not included, but essential:

    Cleaning & Sanitation

    Mash

    Boil

    Pitch The Yeast

    Fermentation

    Fermentation with Temperature Control

    Fermentation without Temperature Control

    Packaging Your Finished Beer

    Hallertau Blanc - (25g Pellet Hop)
    Rice Hulls - 1kg
    LalBrew BRY-97 American West Coast Ale Yeast
    x 11g
    Single Batch (35l BrewZilla)
    Double Batch (65L BrewZilla)
    StellarClean PBW
    StellarSan
    Ethanol Spray
    this calculator
    brewing salts
    Brewfather
    whirfloc
    yeast nutrient
    RAPT Pill
    Fermentation Heating Wrap Belt
    RAPT Temperature Controller
    RAPT Fermentation Chamber
    RAPT Pill Hydrometer
    Amber Glass Bottles with Swing/Flip Top Lids
    Amber PET Bottles with Screw Caps
    here
    here
    here
    beer@kegland.com.au

    Gypsum

    Gypsum

    4.2g

    Mash pH

    5.25g

    Pre-boil Volume

    52.3L

    Mash Temperature

    65°C

    Recommended Supplies

    Fermzilla All Rounder
    FermZilla Tri-Conical
    RAPT Fermentation Chamber
    RAPT Temperature Controller
    Saber LED Refractometer
    Ball Lock Kegs
    Oxebar Kegs
    Bottles
    Cans
    StellarClean
    StellarOxy
    StellarSan
    Ethyl Sanitiser Spray
    Brewing Salts Starter Kit
    Whirlfloc