Registering your Device

1. Sign up for a RAPT account

   To utilise the Wi-Fi connectivity of the RAPT Pill you will need to sign up for an account on the RAPT portal. This will allow you to track and monitor your specific gravity and fermentation temperature in real time.

   1. Sign up for an account on the RAPT portal.

   2. Once signed up log in to your account on the RAPT portal.

2. Connect your smart phone or tablet to the RAPT Pills Wi-Fi Network

   1. Plug your Rapt Pill into a charger or computer with a USB-C cable (not included).

   2. OR (Wireless Charging ONLY) Place the Pill on the Wireless Charging base. Note. The battery needs to have sufficient charge to broadcast the Captive Portal when wireless charging is used.

   3. On your smart phone or tablet, open your Wi-Fi settings and connect to the "RAPT Pill XXXX" Wi-Fi network using the password "kegland1".

3. Open the RAPT Pill Captive Portal

   1. Once you have connected your smart phone or tablet to your RAPT Pills Wi-Fi network you will need to open the RAPT Pill Captive Portal.

   2. Your smart phone or tablet should provide a prompt to sign into the network of your RAPT Pill when you connect to its Wi-Fi Network. Clicking on this prompt will open the RAPT Pill Captive Portal.

If you are not prompted to sign into the network of your RAPT Pill by your smart phone or tablet then open your Wi-Fi settings and select the “RAPT Pill XXXX” Wi-Fi network again to open the Pill Captive Portal.

TIP: Once you have opened the RAPT Pill Captive Portal navigate to Diagnostics and write down the IP (AP). This is the IP address of your RAPT Pill and can be input into your web browser to quickly connect the RAPT Pill Captive Portal when plugged into power.

Once you have connected to your RAPT Pill’s Wi-Fi network and opened the Pill Captive Portal you will still need to connect your RAPT Pill to your home Wi-Fi network and register the device to your RAPT account before the RAPT Pill will send any telemetry.