Tips, Tricks & Accessories
FermZilla All Rounder 30L & 60L | Tips, Tricks & Accessories
Last updated
FermZilla All Rounder 30L & 60L | Tips, Tricks & Accessories
Last updated
The FermZIlla range is distinguished by being pressure capable fermenters which allow fermenting and transferring beer under pressure. There are also a number of super handy accessories available to improve your beer and your brewing! The FermZilla range has a number of advantages over more traditional fermenters on the market.
As a pressure capable fermenter, the FermZilla can be treated as an all in one fermentation and dispensing unit. If the FermZilla is equipped for pressure fermentation, simply ferment and cold crash as normal. Once the cold crash is complete, there is no need to transfer to a keg.
Simply connect the FermZilla to CO2 using the Gas Post, and connect a tap of some kind to the Liquid Post. Once connected (and the beer is chilled and carbonated) you are good to go!
Recommended taps include the , the and the . These are all great options to have to hand for pulling samples during fermentation (to check gravity etc).
The Hop Bong is a fantastic way to dry hop in a FermZilla without introducing O2 (LODO). The Hop Bong is suitable for all pressure capable FermZillas (the Tri-Conical and the All Rounder). It can be purchased as a (if you have the required Carbonation Caps, dip tube etc) or as a .
The Hop Bong assembly can be attached at the start of fermentation. It can also be added to the lid at any stage - simply keep the 2" Butterfly Valve closed until the Hop Bong has been attached.
Remove the lid of the Hop Bong by undoing the 2" Tri Clover clamp
Add the required dry hop to the Hop Bong
Replace the lid on the Hop Bong and secure the 2" Tri-Clover clamp
Set your regulator to between 5-10psi and connect the gas ball lock disconnect to the Carbonation Cap on the Hop Bong
While connected and pressurised, pull the PRV on the lid of the Hop Bong several times. This will purge and refill the container with CO2, effectively displacing the O2 in the Hop Bong
Once purged, disconnect the CO2 and open the Butterfly Valve to introduce the hops into the FermZilla tank
For more information and detailed instructions for the Hop Bong, please refer to this video
For more information , please refer to this video
For more information, please refer to this video
Due to the shape of the FermZIlla range (the conical shape of the Tri-Conical FermZilla and the rounded base of the All Rounder) you can skip the whirlpool in the kettle and just transfer everything! The hops and trub will simply settle out. You can then use the Collection Container of the Tri-Conical to dump this (if desired). In addition, when transferring under pressure, we are only drawing clear beer from the surface during the process, greatly minimising the amount of solids that can make their way into the keg.
The is the perfect accessory for the FermZilla range! Unlike stainless fermenters, the FermZilla is made of transparent PET. PET is easy to clean, sanitary and also transparent to WiFi signals, making the use of a network capable floating hydrometer such as the RAPT Pill very simple. Using the RAPT Pill connected to your home network (or to another RAPT device such as a via Bluetooth) you can get near real time gravity and temperature readings from directly inside the FermZilla! This unlocks powerful and easy fermentation and temperature control and is a highly recommended upgrade.
The is the most capable Fermentation Chamber on the market. It was designed from the ground up to hold 2 x 30L FermZilla All Rounders, 1 x 27L FermZilla Tri-Conical (with or without Hop Bong) or 1 x FermZilla 60L All Rounder or 55L Tri-Conical. With built in heating and cooling, WiFi and Bluetooth* connectivity and connection and control via the RAPT ecosystem it is the easiest and most advanced method of fermentation control on the market!
*Bluetooth connectivity works only in conjunction with a
The FermZilla range can also be used in conjunction with a glycol chiller such as the
You will need to install a for the temperature probe and also a cooling coil such as the . All FermZilla lids have ports marked for drilling in order to fit these accessories. Otherwise, a can also be purchased. These can also be installed in the which enables the use of the Hop Bong in conjunction with a glycol setup.